Distributed mMIMO, Radio Stripes, HBF Antennas, and pCells Among the Revolutionary Technologies for Indoor Networks


With the majority of 5G networks being deployed using the 3.5 Gigahertz (GHz) bands, it is very likely to suffer indoor environments because outside-in does not provide adequate indoor coverage in the mid and high bands, 3.5 GHz and Millimeter Wave (mmWave). In-building wireless solutions are critical for 5G’s success in the consumer and enterprise markets. However, traditional solutions such as Distributed Antenna Systems (DASs) do not support frequencies above 3 GHz and require major reconstructive engineering work to increase their capacity. The ever-growing need to increase network capacity and costly on-site infrastructure upgrades motivate infrastructure vendors to invest in other innovative technologies. According to a new report from global technology intelligence firm ABI Research, some revolutionary technologies include Distributed massive Multiple-Input Multiple-Output (mMIMO), Radio Stripes, Holographic Beam Forming (HBF) antennas, pCell technology, Open Radio Access Network (RAN) DASs, and Reconfigurable Intelligent Surfaces (RISs).

Among the technologies, Distributed mMIMO, HBF, and pCell are already available and expected to be deployed on a larger scale in 2023. “Distributed mMIMO integrates mMIMO into indoor systems to enable gigabit connectivity and sustainable network capacity expansion. HBF antennas are tailored for mmWave and software-defined antennas to employ the lowest possible architecture in terms of Size, Weight, Power, and Cost (SWaP-C), which is acknowledged to be an important consideration by network operators in denser 5G networks. pCell technology exploits interference in wireless networks through large-scale coordination among distributed transceivers and synthesizes a cell for each user. It multiplies the spectrum capacity with uniform and high data rates in the entire coverage area,” explains Fei Liu, 5G and Mobile Network Infrastructure Industry Analyst at ABI Research.

“Moving toward 5.5G Open RAN DASs could be another technology where there are open interfaces between the Radio Units (RUs) and Virtualized RAN (vRAN) functions operating on cloud infrastructure, resulting in a reduction of the number of transmitter elements and, thus, the related power consumption, addressing one of the major issues that network operators face. In the longer term, RIS and Radio Stripes are viewed as promising for enhancing indoor coverage,” Liu adds. A RIS is nearly passive, does not have power amplifiers, and does not transmit new waves. Hence, the power consumption is much lower. A radio stripe is another technology expected to improve network quality and performance while enabling easy network deployments.

“Academic research on RISs has been going on for several years, and now is the time for industry players, including vendors and network operators, to be heavily involved and provide clearer feedback on which directions to prioritize,” Liu recommends. “A RIS requires time and experience to build up as a revolutionary technology.”

These findings are from ABI Research’s Revolutionary Technologies for Indoor Cellular Networks application analysis report. This report is part of the company’s 5G & Mobile Network Infrastructure research service, which includes research, data, and analyst insights. Based on extensive primary interviews, Application Analysis reports present an in-depth analysis of key market trends and factors for a specific technology.

Get involved!

Get Connected!
Connect with like-minded people, start groups, share files and documents, create group video meetings, attend conferences, and more.


No comments yet